ECG KOKUSAI Co., Ltd.

Various measurement hardware and inspection equipment|Impulse winding tester

Products

Coil tester

Integrated tester
Intelligent Controller WTX-type Ⅱ

Upgraded intelligent controller device ( WTX )!

Even 6 lead coil which is not conventionally made by changing the test cable into 6 from 4 is possible. The examination item of DC resistance, impulse, AC hi-pot and insulation resistance can be switched automatically at once.

Features

An impulse test machine (DWX) is used as a controller, and an interchange machine (WTX), resistance meter and Hi pot tester are controlled. Automatic examination is possible.
The test cables are changed into 6 from 4 examination cables.
A setup of each circuit of arbitrary Hi-Lo is possible.
The number of the maximum steps is changed into 18 steps from 14 steps.
Condition data of 49 models in the main part has been changed to 99 models・The CF models has been changed to 50 models.
Interlock functional loading

Specification

WTX-typeⅡ Number of the maximum steps 18 step
Corresponding procedure RS-232C control and external I/O control
Impulse tester Applied voltage DWX-01A(50V~1000V)/DWX-05Aor05PD(0.5kV~5.0kV)
Judgment method A comparison system with a master waveform
Examination step 6 step
Test time 0.5 sec/1 step
Number of memory of master waveform 700 models in CF memory card
Corresponding procedure RS-232C control and external I/O control
DC resistance examination Corresponding model

TSURUGA:3585/3565(Corresponding schedule)

HIOKI:RM3545/RM3544/3541
Examination step 6 step
Test time 0.5 sec/1step
Corresponding procedure RS-232C control
Insulation resistance test Withstand voltage test Corresponding model

TSURUGA:8525/8505(Corresponding schedule)
KIKUSUI:TOS-5200/TOS920X/TOS930X

Others:External I/O control article
Examination step 6 step
Test time Arbitrary time setup
Corresponding procedure RS-232C control or external I/O control
Connection apparatus (arbitrary)
External control apparatus PC Corresponding procedure:
RS-232C control
PLC Corresponding procedure:
RS-232C control or external I/O control


Accessories
Operation manual ×1 RS-232C cable ×Required number Test machine connecting cable ×1
Test cable ×6 Controller power cable ×1 Cable of resist pressure test ×1
Resistance test cable ×1 Earth cable ×1 Control BOX ×1

■Specification and a design may be changed without a preliminary announcement for improvement reasons etc.
■There may be difference in a color, textures, etc. may be on the photograph which are written on the catalog during printing.
■Although an effort is made to indicate exact information about the contents of this catalog, if there should be a point of advice , such as a clerical error, please give a notice to sales promotion division of our company.