Coil Tester
Tester for single and three phase stator
Rotational Direction Tester RDT-308
From the determination of the direction of rotation of the stator coil, defects and windings can also be detected.
Features
Up to 10 models can be registered to set test conditions.
Easy to call standard values, which simplifies testing
Simple and precise inspection could be cobducted in two test modes
It is equipped with a mode for determining CW/CCW and measuring the magnetic flux distribution.
Auto-detect sensitivity adjustment by auto gain function
There is no adjustment required for each model, and it can be tested only by the initial setting.
Specification
| Power suply | AC90V-240V 50/60Hz | |
| Excitation Signal | Phase | Three Phase |
| Frequency | 5kHz （Sine wave） | |
| Excitation voltage | Phase 5Vp-p | |
| Setting range | 100 steps | |
| Detection | Sensitivity Range | 10 steps＋Auto setting range mode |
| Corresponding poles | 2/4極（Normal diecotor） 2/4/6/8極（Option ditector） |
|
| Outer diameter of ditector | 2/4 pole(Normal type）：Φ38mm 2/4 pole（Option type）：Φ22mm 2/4/6/8 pole（Option type）Φ45mm |
|
| General | Environment | Temperature range5℃-40℃ Humid range20%-80% |
| Dimensions/Weights | H98×W195×D350 (mm)/1.8kg | |
| Power consumption | 40VA以下 | |
| Communication | I/O、RS232C | |
| Accessories | Power cable (3m) 1 unit 3P-2P conversion adapter 1 unit Diteotor Cable（1.5m) 1 unit Excitation signal cable (1.5m) 1 unit Normal Ditector Coil 1 unit Manual 1unit Spare Fuse（1A） 1unit |
|
Test Contents
"Test mode 1" which simply detects CW/CCW and "Test mode 2" which graphs the causation voltage and detects abnormality for each phase can be set.
In test mode 2, the positional relationship between the detector and the winding is fixed, and the test is performed in the same way as in test mode 1.
In this mode, the eight coils built into the detector (if standard) allow you to see the distribution and runout width of each magnetic field on the screen, so you can detect even the smallest NG, such as winding or poor connectivity in one place.
■Specification and a design may be changed without a preliminary announcement for improvement reasons etc.
■There may be difference in a color, textures, etc. may be on the photograph which are written on the catalog during printing.
■Although an effort is made to indicate exact information about the contents of this catalog, if there should be a point of advice , such as a clerical error, please give a notice to sales promotion division of our company.
