Discharge testing machine
With regards to partial discharge test
AC partial discharge test equipment ACPD-05X
By microwave patch antenna system
Not affected by the test circuit realizing
a highly sensitive partial discharge test! !
As the use of inverter coil will increase in the future, such as house hold appliances, automotive coil, industrial commodity, the examination of such coils will spread and must be done.
Easy to understand screendisplay
The graph of applied voltage (AC) and electric discharge signal is displayed on the screen in real time. The condition of electric discharge generating is observable during an examination. Moreover, the memory of the graph under examination is also memorized into the main part after display and judgment are possible.
Variegated graph-analysis function
Applied voltage PD characteristic graph
Transition of the voltage value during AUTO examination and electric discharge level display.The electric discharge exceeding a threshold value level is displayed in red.
Applied voltage Qmax characteristic graph
The electric discharge level in the applied voltage during AUTO test is displayed.It is graph-ization about partial discharge inception voltage (CSV) and partial discharge extinction voltage (CEV).
Electric discharge generating accumulation frequency characteristic graph
The electric discharge generating accumulation frequency characteristic in the electric discharge level generated
during AUTO test is displayed.
Features
The electromagnetic waves generated from partial discharge with a microwave patch antenna system are detected directly.
Installing an antenna near the test coil, high sensitivity partial discharge test can be performed
Since handling is easy ,the introduction to production line can be facilitated .
The automation of the partial discharge test becomes possible.
Working efficiency improves by the convenient function required for evaluation of a partial discharge test. Break down voltage (CSV), electric discharge extinction voltage (CEV), electric discharge level (PDpeak), electric discharge occurrence probability confirmation k (PDpuls), etc .
Since the electric discharge signal is indicated by a waveform, it is possible to use it visually ,clearly and easily.
Usage
Related motor
Inverter motor, Hybrid car power motor, Automotive motmotor
Related transformer
HV transformer for power supply, Switchingpowersupply transformer for household appliances
Others
Power semiconductor, Insulated film, Evaluation of the charge of an insulation material, etc.
Test image（Reference）
Specification and an outline view
| Power supply | Test voltage & capacity | Maximum5000Vrms 500VA |
|---|---|---|
| Minimum variable step | 4Vrms | |
| Test frequency | 50Hz/60Hz ( Set up at 1Hz step is possible in 50～200Hz） | |
| Partial discharge inspection |
Detection sensitivity | -90～-30dBm |
| Detection result display | -90 to -30dbm indicates as 100 level | |
| Detection charge range | 50pC or more as a relative level. | |
| Antenna cable | Standard 2m (SMA coaxial cable) | |
| Voltage measurement | Voltage display | 0～5000Vrms（Effective value ） |
Measurement accuracy |
±1.5% of reading | |
| Current leak detection | Current disruption |
1～ 25mA(1mA step) or 100mA |
| General | Input power supply V. | AC100～240V±5% 50Hz/60Hz 10A |
| Temperature/ humidity | 23℃±5℃ 20% - 80%RH | |
| Size/Weight | W430×H177×D442 ※About 22kg | |
| External interface | Parallel I/O、RS-232C、USB（Test control, test data input and output |
