Unusual sound and vibration testing machine
Motor vibrophonic monitor
TC-55
Discontinue
Transformer Vibration Tester
The TC-55, with its small and highly sensitive sensor, is designed to detect vibration and rumbling noise of the transformer and various types of coil. The operator can set the high/low ranges of noises and retrieve an automatic evaluation of pass/fail results, shown by the OK/NG lamps. Simultaneously, the meter on the unit indicates the amount of the vibration. The (zero-cross) power can be supplied to the transformer or the test piece. With the contact output, the external control of START, OK, NG is possible.
Specification
Frequency Range | 80Hz~8KHz | |
---|---|---|
Acceleration Range | 0.003G, 0.015G, 0.03G 3 ranges full scale | |
Measured Accuracy | Full scale, within ±5% | |
Range Interchange Error | Within ±3% | |
ternal Control | Control in, control out, START、RESET、 NG、OK、OPE connection |
|
Test Function | Set the "high" & "low" limit at full scale of 5%~99% by using the digit switch | |
OK Test Result Display | Green lamp display on the front panel and connecting output terminal on the back panel. Released by the start or reset button. |
|
NG Test Results Display | Red lamp display on the front panel and connecting output terminal on the back panel. Released by the start or reset button. |
|
Test Output Contact | Each 1a contact type with the capacity of AC125V1A, or DC24V1A(no inductive load) | |
Voltage and Current Supplies | AC75V~250V、0.05A~1A | |
Supply Phase | ON, OFF and zero-volt voltage phase operation | |
Power Supply | Signal phase | |
Power Source | AC voltage upon your request | |
Power Consumption | Approach. 30VA | |
Operating Temperature & Humidity | 10゜C~50゜C, 5%~95% |