ECG KOKUSAI Co., Ltd.

Various measurement hardware and inspection equipment|Impulse winding tester

Products

Unusual sound and vibration testing machine

Leakage Detector
EK-100

Discontinue

Correlation type water leakage detector machine

A correlation type water leakage detector machine is equipped with high sensitive acceleration sensors in two points where the water leak point is placed, the oscillating sound of the very small level generated at the water leak point is caught by two acceleration sensors, and amplifies it with each amplifier. It is put on the electric wave of UHF belt and sends it to the main body. The arrival time interval is accurately requested with the main body by the correlation operation method 、micro computer calculates the position from the distance between two points of sensor and the sound wave velocity of oscillating sound, and displays it on a personal computer.

PC screen

Correlation waveform screen
Correlation It displays by making the measured waveform into a correlation waveform.
Water leak point A→B:The correlation operation is done by the measured shape of waves ,and the result is displayed.
Average The set-up number of times of a sample and the present number of times of a sample are displayed. Continuous measuring is also possible.
Delay time The measured wavy delay time difference is displayed.
Meansurement set-up The condition used for the measurement is displayed.
Meansurement setting The setting condition screen is displayed.
Parameter Set up parameter is displayed.
Set-up pipe kind The length of the sedge road, the sedge kind, and Cankei are set.
Start SwitchThe measurement begins according to a set Condition and the parameter.
Calculation ( Switch ) The water leak point is displayed by the measured data.
Individual waveform screen

*Waveform data from cordless handset A and B can be individually displayed.

*The range can be set on automatic and manual mode

*Waveform data from cordless handset A and B can be individually displayed

Measurement conditions screen
Measurement period The sampling frequency is set. (10khz, 5khz, 2,5hkz)
Filter: LPF Low-pass filter is set. (5KHz, 2KHz, 1HKz, off)
Filter:HPF High-pass filter is set .(100Hz, 200Hz, 400Hz, off)
Average points The frequency of the sample is set. (Continuous,8, 16, 32, 64)
A / D accuracy The A/D converter accuracy is set. (12, 11, 10, 9, 8, 7, 6, 5)
Waveform color An individual waveform display color is set up.
Auto Range:
Input waveform range
The range at the time of an input waveform display is set up.
(500, 1000, 1500, 2000)
Auto Range:
Correlation waveform range
The range at the time of a correlation waveform display is set up.
(1000, 2000, 3000, 4000, 5000)
Parameter Setting Screen
Length[m] Length of the sedge road is set.
Material The sedge kind is set.
Diameter[mm] Size is set.
Externals
Measuring method
Standard Notebook Computer

OS  WINDOWS2000 or XP
CPU Celeron 600MHz above
Memory 128MB above

*The personal computer is not included in the composition goods.

Main Unit

Wireless input part Reception frequency One wave of 400MHz belt
Electric wave form F3E
Power supply part Use power supply Supplied from the USB 5V
Battery longevity Depends on PC performance
Externals size Weight Size 65(H)×210(W)×230(D)
Weight About 2.5Kg

Cordless handset

Wireless input part   Transmission frequency Two waves of 400MHz belt
Electric wave form F3E
Antenna electric power 1mW
Power supply part Use power supply Internal battery
Internal battery AA dry battery ×4
Battery longevity

For about 20 hours(When alkaline battery is used, and radio output)

Performance Voltage amplification level 1000 times( auto level adjustment )
Frequency response 200Hz~1kHz(within-3dB)
External size and weight Size 82(H)×130(φ)
Weight About 600g

Piezo-electricity type acceleration sensor

Voltage sensitivity 535mV/G
External size weight Size φ40×49,5
Weight 200g (Main body only)
Cable length 3m
Waterproof structure IP6