Others
Mechanical products
SIP lead frame attaching machine FI-930T
Ease of use, we have also realized lower prices.
Features
50 kinds of pin cut data are memorized by backup RAM, and when required, it can call at any time.
Since the input of an unnecessary pin and a constant 寸 cut is performed looking at the pin which appears in LCD (liquid-crystal-display screen), it is clear.
The plan substitute to other pitches can also be performed only by exchange of a sprocket and the Cush tooth in a short time.
A function is upgraded sharply. Speed also became quick 50%.
(Our comparison)
Automation of production is also possible by connecting with leadframe soldering equipment and ADL-780.
Specification
Substrate supply | Manual operation |
---|---|
Application board | 3-40 mm in width, and 10-80 mm in length Double-sided mounting board correspondence (1 mm or more of substrate both-ends space) |
Application leadframe | 12 to 22 mm full length A specification pitch is one sort (2.54, 2.5, 2.0, 1.8, etc.). Change (a sprocket, the Cush tooth) in other pitches serves as an option. |
The number of fitting pins | A maximum of 40 pin |
Frame sending | Pulse motor drive |
standard size cut | Good [ to one to 99 sheets ] by standard equipment and data setup |
Baton | About 1.5 seconds (in the case of 2.54 pitches and 20 pins)/sheet |
Memory function | 50 kinds |
Power supply | AC100V, 300 VA or less |
Air source | 5kg/cm2 |
Outside dimension | L770×W490×H360mm(A reel is excluded.) |
Weight | 40kg |